Megmeet is a listed group company a Industrial automation electrical equipment, power electronics high-tech enterprise specializing in the development, manufacturing, sale.
Home > Microwave Power
Browse Categories
Industrial Power Supply(11)
Motor Driver(19)
Programmable Logic Controller(13)
Sterilization UV Lamp(2)
Microwave Power(5)
Contact us
Industry leading Electrical Control and Energy Efficiency Solutions Provider. Phone:+86-755-8660 0500 Fax:(+86)0755-8660 0999 Mobile:(+86)13537682127 ...
Contact Now
Latest News

Megmeet successfully developed a continuous aerogel device for the preparation of "aerogel insu

Wavelane successfully developed a continuous aerogel device for the preparation of "aerogel insulation felt". Aerogel felt is a kind of flexible thermal insulation material which is made of silica aerogel as the main material and is compounded in reinforcing fibers, such as glass fiber and pre-oxidized fiber.

Megmeet Obtains the First 30kw DC charging module product certificate CE Certification in the World

TüV issued China's first DC charging module product certificate for Shenzhen Megmeet Electrical Co., Ltd., it is also the first CE certificate of 30kW charging module in the world.

MC200E PLC Control And Visual System in Labeling Machine Applications

System components

    1)Megmeet PLC MC200E-4040BTA8  Two Units;

    2)A computer loaded with visual system and Win7 system (loaded with host unit, PLC and
configuration software);

    3)12 servo motors and 2 step motors.

    4)Four visual cameras;

The hardware system connection diagram is as follows:

USB integrator

Operating principles

    1.Test and verify the accuracy and stability of the equipment through the plate drilled with holes, as shown in the following figure:
Position the center coordinates of 34 holes, and then position the center positions of #1, #2 and #3 holes manually by camera.
Then calculate the center coordinates of the remaining 32 holes by matrix, and set the center coordinates of any point manually.
The accuracy of the coordinates is checked by a camera.

    2.Camera marking, mark the position of 34 holes recorded by the first camera on the plate, and the coordinate position is put
into a two-dimensional code by the camera. The clearer the two-dimensional code seen by the naked eye, the higher the accuracy.

    3.Labeling test, as shown in the following figure, attach labels to the center of the 32 holes.

    4.After completing labeling, measure the labeling position through the visual system. Analyze if the stability and accuracy of the equipment
system can meet the requirements. If the CPK (reference standard value) is not satisfied, repeat the above actions until the standard
requirements are met, then you can start the labeling work.

    5.The above PLC communicates with the visual system through RS485 free port protocol.

Summary of applications

    1.C200E—4040BTA can support multi-axial independent motion, and can support 8 axises and the highest frequency can reach 200KHz;

    2.PLC storage capacity can reach 32K. There are 3 communication ports and Megmeet internal communication protocol
MCBUS is supported between the PLCs;

    3.The configuration software Veiwpannel is simple and stable. (Top)